1. Site Preparation

Our crew begins by marking the ground for placement of the HydroGo™ pipe.

Grass is carefully removed and saved prior to digging the trench.

2. Creating and Grading the Trench

The trench is dug and cleaned to accommodate HyrdroGo™ pipe.

Next, the trench is carefully graded and leveled to ensure proper water flow.

Often, surveying equipment is used to determine the proper height, slope and fall of the trench.

3. Pipe Assembly and Trench Insertion

Our patent–pending HydroGo™ pipe with flushable technology is placed in the trenches.

4. Basins and Gutters

Special 12” x 12” Low Profile Basins are installed at appropriate intervals along the system.

It is important to tie gutter downspouts (if available) into the HydroGo™ System.

5. The Finishing Touches

Trenches are re–filled with dirt.

Dirt in the trenches is tamped down for soil compaction.

Each catch basin is graded for proper water flow into the system.

The area is thoroughly cleaned.